Product description: 

 Shenyang months Kam Township paint the external walls of the production of matt emulsion paint, the use of advanced technology formula developed from green latex paint, a variety of substrates such as cement mortar, concrete, cement, gypsum board has a good adhesion. 

 And exterior latex paint features: 
 Paint film solid, delicate texture and tender. 
 Than ordinary products provide superior outdoor durability. 
 Water resistance, chemical resistance, erosion function. 
 Color retention and performance, more filling. 
 Pure green products, do not pollute the environment. 

 And exterior latex paint surface treatment 
 Before painting the exterior walls must be solid, dry, clean and free from dust, according to different situations to take the following approach: 
 New wall (not paint) 
 A wall of humidity: brick and mortar wall of humidity should be below 10%. 
 Two small grease dirt and dust use a mild detergent or solvent cleaning, or scrubbing with a damp cloth to completely remove all stains. 
 (3) the wall surface with the appropriate tools to remove mortar residue and protruding parts. 
 Alkaline cement wall: concrete, cement mortar wall alkaline should ensure that the PH value of less than 10. 
 5 fully dry wall, concrete, plaster walls should be sufficient curing period. 
 6. Wall surface cracks and dents in cement mortar repair; small holes and cracks, such as coatings can not make up, needed a dedicated external walls waterproof putty to repair (try local repair). The use of repair materials, the wall should be thoroughly dried and polished smooth. 
 The old wall (not paint) 
 (1) Check the wall condition, according to the different situations mentioned earlier. 
 Clear wall accumulation of dust. 
 3 walls breeding ground for mold or moss is removed with high pressure water, and mildew solution processing, and reuse of water wash, dry. 
 The old wall (brushing latex paint) 
 (1) the integrity of the original coating attached to the wall due to erosion to produce the powder can be used water cannons to remove the layer of powder, dry. 
 2 local damage of old film, with the appropriate tools to remove damaged coating to remain firmly part of the edge and patch formation. 
 Old film damage and chalking phenomenon, it should be scooped up and repair the flat, brushing matching primer. 
 4 lines of the old coating the surface of a solid can be directly re-painted; otherwise need to use the sandblasting approach. 

 And exterior latex paint application conditions: 
 Recognized prior to coating the substrate to achieve the coating requirements; 
 Do not wet or cold weather conditions, construction, or not achieve the desired coating effect, when the case of fog, high winds, rain, outdoor construction should be stopped; 
 Select the appropriate construction methods and construction tools, construction techniques recommended by the construction operations; 
 Control coating interval, recoat time is reached before the next coat of paint brushing. Too short recoat time will result in the following coating is dry and slow, wrinkling, blistering, poor water resistance and adhesion problems.